Wheeler Professional FAT Wrench Screwdriver Set (100 piece Set)
Take gunsmithing to the next level with the Wheeler® 100-Piece Professional F.A.T. Wrench® Screwdriver Set. The combination of our iconic F.A.T. Wrench (Firearm Accurizing Torque) with 97 screwdriver bits and adapters makes this set a gunsmith’s dream. Equipped with an adjustable torque range that delivers 10-65 in-lbs., the F.A.T. Wrench is engineered to tackle a wide variety of common gunsmithing tasks like tightening scope bases and rings, action screws, and more with precision. Both the F.A.T. Wrench and the ¼” driver feature magnetized tips and rubber over-molded handles that improve ergonomics and grip while reducing hand strain. The driver shafts and bits all have a black phosphate coating that prevents rust and corrosion and extends tool life; guaranteeing that your tools will look great for years to come. All the tools are neatly organized and secured in a premium latching hard case that easily stacks on top of other Wheeler screwdriver sets for smart, convenient storage.
• Comprehensive Set of Flat, Phillips, Square, SAE/Metric Hex, Torx, and Specialty Bits for Many Common Fasteners
• Included F.A.T. Wrench Achieves Perfect Torque without Causing Damage to the Fastener
• Hollow-Ground Flat Bits Create a Precise Fit to Prevent Damage to Screws and Firearms
• Rubber Over-molded Handles Improve Ergonomics and Increase Grip while Reducing Hand Strain
• Magnetized Driver Tips Securely Hold Bits, Ensuring They will not Fall Out During Use
• Phosphate Coating on Bits and Shaft Prevents Rust and Corrosion
• Premium Latching Hard Case Organizes and Protects Contents, Keeping them Secure and Protected During Transport and Storage
FLAT: #1-#6, #8, #13-#16, #18-#21, #27-#30, #32-#35, #38, #39, #41, #45, #47
SAE HEX (INCH): 0.05″, 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4, 5/16″, 3/8″
METRIC HEX (MM): 1.5, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10mm
TORX: T5, T6, T7, T8, T9, T10
Security TORX: TT15, TT20, TT25, TT27, TT30, TT35, TT40
PHILLIPS: PHO, PH1, PH2, PH3 & PH2 (LONG)
SQUARE: SQ#1, SQ#2, SQ#3
PIN (INCH): 0.062″, 0.093″, 0.118″, 0.125″
METRIC NUT DRIVER (MM): 5, 5.5, 6, 7, 8, 10, 12mm
SAE NUTDRIVER (INCH): 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″
SPECIALTY: LEUPOLD, BUEHLER, HEX ADAPT 1/4″ DRIVE