Sundown Audio 10″ Woofer, 1250W RMS / 2500W Max Dual 4 Ohm Voice Coils
2500W MAX
1250W RMS
Dual 4-Ohm Voice Coils
Vented magnetic gap
Aluminum 2.75” voice coil former for superior heat dissipation
Innovative high-velocity vented frame spacer ring
Large aluminum Faraday ring for smooth acoustic response
Patented high-strength cast aluminum frame
High-temperature voice coil wire
Spring-loaded terminals
Stitched-on double “XL” tinsel lead wires
This mighty 10-inch was a top-down improvement of its predecessor, which now delivers over 35mm of mechanical excursion. The 2.75” coil punches way above its weight, outperforming most 3” coils without adding weight. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust double-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone and a strong foam surround were used to complete this masterpiece.
Re-Ohms: 6.82
FS-Hz: 36.1409
VAS-L: 12.3547
Qes: 0.3744
Qms: 3.5051
Qts: 0.3383
Le-mH: 4.456
BL-NA: 28.3634
Mms-Grams: 281.6632
Cms-uM/N: 57.7815
Sensitivity-dB @ 1w/1m: 83.67
Xmax: 19mm
Displacement (Inches): .08 cu ft
Depth (Inches): 7
Motor Diameter (Inches): 9.37
Ported Enclosure Size: 1.0 cu ft
Recommended Port Area: 15 sq in
Recommended Port Tuning: 35hz
Sealed Enclosure Size: 0.5 cu ft
The boxes say 1000W but Sundown has confirmed they now rate these at 1250W RMS
(However they have no plans of updating the boxes for the subs.)
Sold Individually


