Alphasonik Alpha Series Full Range Monoblock Amplifier, 2000W RMS
2000W x 1 RMS @ 1 Ohm
1550W x 1 RMS @ 2 Ohms
900W x 1 RMS @ 4 Ohms
Dim (WxHxL) 7.28″ x 2.30″ x 7.68″
1 Ohm Stable ; Class D
Nickel Plated Terminals
Low Level Inputs
Bass Boost: 0 – 12dB
S/N Ratio: >100dB (+/-3dB)
Variable Bass EQ: 35Hz – 70Hz
Low Pass Crossover: 50Hz – 20kHz
High Pass Crossover: 15Hz – 2kHz
Frequency Response: 15Hz – 20kHz
Variable Input Sensitivity: 200mV – 6V
Remote Bass Knob Included
Protection: Thermal, Short Circuit, Overload and DC Offset
Amplifier Status Indicator
The alpha series amplifier have three different LED indicators. The first indicator is a power status for visual verification if the amplifier is OFF or ON. The second indicator is a clipping indicator, a extremely useful tool to tune the system. The third indicator is a protection status of the unit and will illuminate if any faults are present.
Nickel Plated Terminal Block
Nickel plated terminal blocks have been used on the Alpha series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
Extruded Heat Sink
Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.
Remote Bass Knob
External bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.