HornBlasters Outlaw 228 Train Horn Kit – Chrome

HKC3228HCHROME Horn Blasters

Log in to see price!

Available on backorder

HornBlasters Outlaw 228 Train Horn Kit – Chrome

We love bringing a huge train horn sound to your daily driver. With the Outlaw Chrome 228H Train Horn Kit, it has never been easier! You get one of the loudest train horns powered by one of the most compact and cost-effective air-source units, perfect for installs with tight space or a limited budget. With most of the kit already pre-plumbed and pre-wired, the Outlaw Chrome 228H Train Horn Kit is an ideal beginner kit, with the same power and quality of the high-end kits.

It’s hard to beat the massive sound that the Outlaw Chrome Train Horn can produce. As a three-chime metal horn with a flashy chrome finish, the Outlaw Chrome Train Horn will make sure you get people’s attention with its looks as well as its sound. The Outlaw Chrome Train horn comes with the 3/8″ valve already pre-installed, ensuring that you get out on the road and honking ASAP!

The 228H Air Source Unit powering our Outlaw Chrome Train Horns might have a small install footprint, but packs heaps of power. The 2-gallon tank provides enough air to get 5-6 seconds of blast time out of your Outlaw Chrome Train Horns, and the rapid Viair 280C Air Compressor mounted to the tank can recharge the system from 110 to 145 in only 1 minute and 20 seconds! This system comes pre-plumbed with all the fittings you need and pre-wired, so installation is fast and simple.

As with all HornBlasters kits, the Outlaw Chrome 228H Train Horn Kit comes complete with all required components and detailed instructions.

Heavy Duty Chrome Finish Train Air Horns
145 PSI Air System
All-inclusive Train Horn Kit
Max Honk Time: 5 to 6 Seconds

Outlaw 3000 Chrome Train Horn
HornBlasters 228H Air Source Unit
10ft 1/2 in. of D.O.T. Air Line
18ft 12ga Wire
18ft 18ga Wire
Wiring & Plumbing Kit
Mounting Hardware
Detailed Instructions

Horn: HornBlasters Chrome Outlaw Train Horn
Length: 18.5″ (469.9 mm)
Width: 15.5″ (393.7 mm)
Height: 12.5″ (317.5 mm)
Weight: 15 lb (6.8 Kg)
Fitting: 1/2″ Tube

Air Source Unit: HornBlasters 228H
Working Pressure: 150 PSI
Length: 19.0″ (482.6 mm)
Width: 6.0″ (152.4 mm)
Height: 13.75″ (349.25 mm)
Weight: 17.15 lb (7.78 Kg)

Tank: 2.0 Gallon 5 Port Tank
Volume: 2 Gal (8.8 L)
Ports: 5 x ¼″ NPT Ports
Length: 19″ (482.6 mm)
Width: 6″ (152.4 mm)
Height: 7.4″ (187.96 mm)
Weight: 10.5 lb (4.76 Kg)

Compressor: 280C Air Compressor
Voltage: 12 volts DC
Max Amperage: 16 amps
Maximum Duty Cycle: 30% @ 100 PSI
Length: 7.8″ (198.12 mm)
Width: 3.95″ (100.33 mm)
Height: 6.35″ (161.29 mm)
Weight: 6.6 lb (2.99 Kg)

(Note: Tank mounted air compressors are not fully sealed.  For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc…)

Manufacturer Model # HK-C3-228H
Weight 0.00 lbs
Carton Dimensions