The Mr. Heater – DeWalt (DXH2000TS) thermostatically controlled 2-stage electric heater operates at 20,000 watts on a 240v single phase circuit. As a convenience, this heater can also be used at 13,000watts with the flip of a switch. Constructed with dual coil supports oversized ergonomic handle, included wheel kit and very durable jobsite construction.
2-Stage Operation connects to a 100A or 60A breaker. 100A service provides high or low heat outputs
Burner coils are supported at both the top and bottom to reduce transport noise and provide extra support for increased coil life
Recessed controls provide protection for switches and knobs
Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature
Designed and certified as an unattended source of jobsite heat
Fan only setting for circulating air on the jobsite
Amps 54 / 81 A
Minimum Breaker Required 2-Pole 100A @ 20kW
Minimum Breaker Required 2-Pole 60A @ 13 kW
Output (BTU/HR) 68,242 / 44,357 BTU/HR.
Output (CFM) 600 CFM
Output (kW) 20kW / 13 kW
Phase Single System 240v
Watts 20,000 W
Weight 45 Lbs.