Orion Cobalt Series Bass Processor with Remote Control
Digital Bass Enhancement Processor: Restores low-frequency information lost in compressed or factory audio signals, delivering deeper, tighter, and more impactful bass.
Sweep Frequency Control: Adjusts the center frequency of the bass enhancement to target the exact bass range you want to restore or boost.
Width Bandwidth Control: Allows precise adjustment of the bass processing range for either wide low-frequency enhancement or tighter, more focused bass response.
Selectable Output Voltage: Choose between 2.5V, 5V, 7.5V, or 10V output levels to match your amplifier’s input sensitivity and system configuration.
High Signal-to-Noise Performance: Provides a clean audio signal with a signal-to-noise ratio greater than 110dB for minimal background noise.
Ultra-Low Distortion Processing: Maintains excellent audio clarity with less than 0.02% total harmonic distortion at 2V output.
Balanced / Unbalanced Input Options: Allows compatibility with both aftermarket head units and factory audio systems.
Ground Isolation Control: Helps eliminate alternator whine and system noise using selectable grounding modes.
Remote Bass Control Support: Includes a remote port that allows real-time bass adjustment directly from the driver’s seat.
EQ Boost / Cut: 15 dB
Frequency Response: 10 Hz – 30 kHz
Subsonic Filter: 31 Hz – 71 Hz
Signal-to-Noise Ratio: >110 dB
THD @ 2V Output: <0.02%
Channel Separation: >80 dB
Interchannel Gain Tracking: 0.1 dB
Selectable output levels (2.5V, 5V, 7.5V, 10V)
Power Supply: 6.5V – 18V
Maximum Input Level: 10V
Maximum Output Level: 10.5V
Input Sensitivity: 10.7V
Input Impedance: >50K Ohms
Output Impedance: 100 Ohms
Dimensions: 7.28” x 4.13” x 1.02”