SoundQubed 1.6″ Shallow Compression Neodymium Super Bullet Tweeter with RGB LED Illumination
Sold In Individually
Nominal Diameter: 1.6″/ 42mm
Nominal Impedance: 4 ohms
Continous Power Handling: 30 Watts
RMS Power Handling: 45 Watts
Maximum Power Handling: 90 Watts
Sensitivity (1w/1 m): 103dB
Frequency Response: 2 KHz – 20KHz
Recommended Hi Pass Crossover: 3KHz
BODY/ FEATURES
Filter (Bass Blocker): 3.3uf
Body Material: Aluminum
Body Color/ Finish: Black
Faceplate Color/ Finish: Black
Bullet Material: Translucid ABS with RGB LED
Rubber Gaskets: Yes, 1 x 5mm + 1 x 1.9mm (thickness)
Locknut ring: Yes, 2 x Aluminum 4.7mm (thickness)
RGB Wire: Yes, with fast connector
MOTOR
Voice Coil Diameter: 1″/ 25.4mm
Voice Coil Former Material: KSV
Winding Material: Aluminum Round Wire
Diaphragm Material: Polyether Ether Ketone (PEEK)
Magnet Material: Neodymium
Magnet Size: 0.96″ x 0.27″ x 0.27″
MEASUREMENTS
Overall Diameter: 2.28″/ 58mm
Overall Depth: 1.93″ / 49mm
Front Mount Baffle Cutout: 1.73″ / 44mm
Mounting Depth: 1.77″- 1.26″/ 45-32mm