SoundQubed 10″ Woofer, 600W RMS/1200W Max, Dual 2 Ohm Voice Coils (Sold Each)
RMS Power: 600 W
Peak Power: 1200 W
Magnet Weight: 100 oz
Ohm loads: Dual 2 Ohm
Coil Size: 2.5″ diameter four-layer copper coil
The HDS2 600W RMS Subwoofer with 1200W peak
The Heavy Duty Street 2 Series 600W RMS Subwoofer improves on its predecessor in terms of build, sound quality, heat dispersion, and frequency response.
The HDS2 series is an affordable option for your daily-driver car audio system build
Designed for sealed, ported, or band-pass enclosure
10 AWG push terminals
The oversized double magnet in the HDS2 is provides consistently high output levels at 600 Watts RMS
The vented, electroplated back plate lets heat flow away from the coil
2.5-inch diameter, four-layer, copper dual voice coil with a conical back plate for longer travel
High-temperature adhesives and high quality coil wire
Cast aluminum frames
A softer three-piece spider system achieves enhanced performance and lower tuning
An Extended Range of Motion (EROM) surround profile keeps your cone diameter as large as possible while allowing for long, controlled excursion
The EROM profile gives you more cone area, greater stiffness, and lower mass for more accurate coil signal response
Non-pressed, fiber added cone for maximum rigidity and long life.
RMS Power: 600 W
Peak Power: 1200 W
Magnet Weight: 100 oz
Coil Diameter: 2.5″
Coil Length: 40 mm
Woofer Size: 10″
F(s): 33.65 Hz
Z(max): 65.65
Q(ms): 5.461
Q(es): 0.3991
Q(ts): 0.3719
V(as): 17.43 L
L(e): 5.745 mH
n(0): 0.1586 %
M(ms): 201.7
C(ms): 0.111
Sensitivity 1W/1m: 84.10
BL: 21.86
Xmax: 14
Sd: 8.125″
Displacement: 0.06ft³
Sealed Enclosure (Cu Ft): .5-1.0 FT³
Ported Enclosure (Cu Ft): .75-1.25 Ft³
Mounting Depth: 6.75″
Circle Cutout: 9.3″