Victron BlueSolar MPPT 150/35
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
– Color Control GX or other GX devices
– A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
BlueSolar Charge Controller MPPT 150/35 MPPT 150/45
Battery voltage: 12 / 24 / 48V Auto Select (software tool needed to select 36V)
Rated charge current: 35A
Nominal PV power 1a, b): 35A 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W
Max. PV short circuit current 2): 40A
Maximum PV open circuit voltage: 150V absolute maximum coldest conditions – 145V start-up and operating maximum
Maximum efficiency: 98%
Self-consumption: 12V: 20 mA 24V: 15 mA 48V: 10mA
Charge voltage ‘absorption’ Default setting: 14.4 / 28.8 / 43.2 / 57.6V (adjustable)
Charge voltage ‘float’ Default setting: 13.8 / 27.6 / 41.4 / 55.2V (adjustable)
Charge algorithm: multi-stage adaptive (eight pre-programmed algorithms)
Temperature compensation: -16 mV / -32 mV / -64 mV / °C
Protection: PV reverse polarity / output short circuit / over-temperature
Operating temperature: -30 to +60°C (full rated output up to 40°C)
Humidity: 95%, non-condensing
Data communication port: VE.Direct
ENCLOSURE
Color: Blue (RAL 5012)
Power terminals: 16 mm² / AWG6
Protection category: IP43 (electronic components), IP22 (connection area)
Weight 1.25 kg
Dimensions (h x w x d) 130 x 186 x 70 mm
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) PV voltage must exceed Vbat + 5V for the controller to start. Thereafter minimum PV voltage is Vbat + 1V.
2) A PV array with a higher short circuit current may damage the controller.