Victron Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Converter
Input voltage range: 10-17 V
Under voltage shut down: 7 V
Under voltage restart: 7.5 V
Nominal output voltage: 12.2 V
Output voltage adjust range: 10-15 V
Output voltage tolerance: +/- 0,2 V
Output noise: 2 mV rms
Cont. output current at nominal output voltage and 40 °C: 30 A
Maximum output current (10 s) at nominal output voltage: 40 A
Short circuit output current: 60 A
Cont. output power at 25 °C: 430 W
Cont. output power at 40 °C: 360 W
Efficiency: 87%
No load input current: < 80 mA
Standby current: Less than 1mA
Galvanic isolation: 200 VDC between input, output and case
Operating temperature range: -20 to +55 °C (derate 3 % per °C above 40 °C)
DC connection: Screw Terminals
Dimensions (HxWxD) 5.1″ x 7.3″ x 2.8″
Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Adjustable output voltage
Not intended for battery charging.
Please consider using an Orion-Tr Smart for battery charging.