Victron SmartSolar MPPT 150V / 60A MC4 Charge Controller with Bluetooth
Battery voltage: 12 / 24 / 48V DC (Auto) 36V DC Software Programmable
Max. PV short circuit current: 50 A (max 30 A per MC4 connection)
Nominal PV power, 12V DC: 860 Watts
Nominal PV power, 24V DC:1720 Watts
Nominal PV power, 36V DC: 2580 Watts
Nominal PV power, 48V DC: 3440 Watts
Open Circuit: 150 V
Maximum efficiency: 98%
Maximum PV open circuit voltage: 150V absolute maximum coldest conditions / 145V start-up and operating maximum
Charge voltage ‘absorption’: Default setting: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
Charge voltage ‘float’: Default setting: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
Charge voltage ‘equalization’: Default setting: 16.2 V / 32.4 V / 48.6 V / 64.8 V (adjustable)
Charge algorithm: multi-stage adaptive (8 pre-programmed algorithms) or user defined algorithm
Protection: PV reverse polarity / Output short circuit / Over temperature
PV terminals: Two pairs of MC4 connectors
Operating temperature: -22° to 140°F – Full Rated Power up to 100°F
Data communication: VE.Direct and Bluetooth
Dimension (H x W x D): 7.3″ x 3.7″ x 9.8″
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch.
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
Synchronized parallel charging with Bluetooth
Up to 10 units can be synchronized with Bluetooth.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.