Victron SmartSolar MPPT 150V / 100A – Tr Charge Controller with Bluetooth & VE.Can Interface
Battery voltage: 12 / 24 / 48V DC (Auto) 36V DC Software Programmable
Rated Charge Current: 100 Amp
Nominal PV power, 12V DC: 1000 Watts
Nominal PV power, 24V DC: 2000 Watts
Nominal PV power, 36V DC: 3000 Watts
Nominal PV power, 48V DC: 4000 Watts
Maximum efficiency: 98%
Open Circuit: 150 V
Charge voltage ‘absorption’: Default setting: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
Charge voltage ‘float’: Default setting: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
Charge voltage ‘equalization’: Default setting: 16.2 V / 32.4 V / 48.6 V / 64.8 V (adjustable)
Charge algorithm: multi-stage adaptive (8 pre-programmed algorithms) or user defined algorithm
Protection: PV reverse polarity / Output short circuit / Over temperature
Operating temperature: -22° to 140°F – Full Rated Power up to 100°F
Data communication: VE.Direct, VE.Can and Bluetooth
Dimension (H x W x D): 7.3″ x 3.7″ x 9.8″
Solar charge controller
The MPPT SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current 60Amp. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth
Control Your Charger Remotely – Bluetooth
The MPPT SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Optional: SmartSolar Pluggable LCD Display