Victron Orion-Tr Smart 12/12-18A (220W) Isolated DC-DC charger with Bluetooth

ORI121222120V Victron

Log in to see price!

Only 1 left in stock

Victron Orion-Tr Smart 12/12-18A (220W) Isolated DC-DC charger with Bluetooth

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

Suitable for both lead acid and lithium batteries.
Suitable for high temperatures up to 130°F / 55°C with a full rated output up to 100°F / 40°C.

Input voltage range: 8-17 V
Under voltage shut down: 7 V
Under voltage restart: 7.5 V
Nominal output voltage: 12.2 V
Output voltage adjust range: 10 – 15 V
Output voltage tolerance: +/- 0.2 V
Output noise: 2 mV rms
Continuous output current at nominal output voltage and 100°F: 18 amp
Maximum output current (10 s) at nominal output voltage: 25 amp
Short circuit output current: 40 amp
Continuous output power at 80°F: 280 Watt
Continuous output power at 100°F: 220 Watt
Efficiency: 87%
No load input current: < 80 mA
Standby current: Less than 1mA
Galvanic isolation: 200 VDC between input, output and case
Operating temperature range: -4° to +130°F (derate 3 % per °F above 100 °F)
DC connection: Screw Terminals
Dimensions (H x W x D) 5.1″ x 7.3″ x 2.8″

Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Fully programmable
– Battery charge algorithm (configurable) or fixed output.
– Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk / absorption / float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.

Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines)
The built-in engine shutdown detection will stop the converter when the engine is not running.
This prevents unwanted discharge of the starter battery.

All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.

High temperature protected
The output current will reduce at high ambient temperature.

IP43 protection
When installed with the screw terminals oriented downwards.

SKU ORI121222120V
Manufacturer Model # ORI121222120
UPC 8719076046066
Case Quantity 5
Brand:
Weight 3.10 lbs
Carton Dimensions 8.25 × 5.5 × 3.5 in
Charge Current

Charge Peak Watts