Victron SmartShunt 1000A/50mV
Supply voltage range: 6.5 – 70 VDC
Current draw: < 1mA
Input voltage range, auxiliary battery: 6.5 – 70 VDC
Battery capacity (Ah) 1 – 9999 Ah
Operating temperature range -40 +50°C (-40 – 120°F)
Measures voltage of second battery, or temperature, or midpoint
Temperature measurement range: -20 +50°C
VE.Direct communication port
Current: ± 0,01A
Voltage: ± 0,01V
Amp hours: ± 0.1 Ah
State of charge: (0 – 100%) ± 0.1%
Time to go: ± 1 min
Accuracy of current measurement: ± 0.4%
Offset: Less than 20 / 40 / 80 mA
Accuracy of voltage measurement: ± 0.3%
Dimensions: 2.6″ x 4.72″ x 2.1″
Cables (included) Two cables with 1A fuse, for ‘+’ connection and starter battery or midpoint connection
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display.
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge,
time to go, historical information and much more.
Alternatively, the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used to monitor a second battery, for midpoint monitoring, or to connect a temperature
sensor.