Victron SmartSolar MPPT 150V / 60A -Tr Charge Controller with Bluetooth
Battery voltage: 12 / 24 / 48V DC (Auto) 36V DC Software Programmable
Rated Charge Current: 60 Amp
Nominal PV power, 12V DC: 860 Watts
Nominal PV power, 24V DC: 1720 Watts
Nominal PV power, 36V DC: 2580 Watts
Nominal PV power, 48V DC: 3440 Watts
Maximum efficiency: 98%
Open Circuit: 150 V
Charge voltage ‘absorption’: Default setting: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
Charge voltage ‘float’: Default setting: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
Charge voltage ‘equalization’: Default setting: 16.2 V / 32.4 V / 48.6 V / 64.8 V (adjustable)
Charge algorithm: multi-stage adaptive (8 pre-programmed algorithms) or user defined algorithm
Protection: PV reverse polarity / Output short circuit / Over temperature
Operating temperature: -22° to 140°F – Full Rated Power up to 100°F
Data communication: VE.Direct and Bluetooth
Dimension (H x W x D): 7.3″ x 3.7″ x 9.8″
Solar charge controller
The MPPT SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current 60Amp. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
Control Your Charger Remotely – Bluetooth
The MPPT SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Optional: SmartSolar Pluggable LCD Display