Wera ESD-Safe Bitholding Precision Screwdriver Set (21-Piece Set)
ESD-Safe tool thanks to surface resistance of <109 Ohm
Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive
Kraftform Micro ESD bit holder
Holder with anti-roll feature, swivel cap and quick-release chuck
In a practical pouch
ESD-safe Wera Micro screwdriver set. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimized corrosion protection and an exact fit.
Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary.
Nutdriver: 2.5 x 2.5 x 80 mm |
Slotted: SLT 0.25 x 1.2 x 40 mm SLT 0.23 x 1.5 x 40 mm |
TORX: TX# 1 x 44mm TX# 2 x 44mm TX# 3 x 44mm TX# 4 x 44mm TX# 5 x 44mm |
TORX PLUS Security: IPR #1 x 1.2 x 40 mm (W/O Bore Hole) |
TORX PLUS: 1IP x 44mm 2IP x 44mm 3IP x 44mm 4IP x 44mm |
Microstix: m x 44 mm 00 x 44 mm F x 44 mm 0 x 44 mm |
Phillips: PH #0 x 44 mm* PH #00 x 44 mm** PH #000 x 44 mm** |
*Size 0 modified according to JCIS 0 (Japanese Camera Industrial Standard)
**Optimized for Asian PH screws
(W x H x D): 6-1/8″ x 4″ x 1-3/8″