Wiha Master Electricians Insulated Tools Set In Rolling Hard Case (112 Piece Set)
112 Pieces, Ideal MRO and Job Site Solution for Insulated Tools
Custom Molded Rolling Carry Case Holds 80 Tools
Lockable, Rolling, Water Tight, Keeps Tools Secure
Inch & Metric Wrench Sets are in External Roll Up Pouches
Professional Quality Tools – Made By Wiha
Insulation 10,000 Volt Tested & 1000 Volt Rated
All Wiha Insulated Tools Individually Tested For Insulation Integrity
Insulated Deep Offset Wrench Metric Set – In Roll Up Pouch
8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 20mm, 22mm, 24mm, 27mm, 30mm, 32mm
Insulated Deep Offset Wrench SAE Set – In Roll Up Pouch
1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 25/32″, 13/16″, 7/8″, 15/16″, 1″, 1-1/16″, 1-1/4″
Insulated Pliers Included
6.3″ Long Nose Pliers, 6.3″ Diagonal Cutters, 8.0″ Long Nose Pliers, 8.0″ High Leverage Cutters, 6.3″ Bent Nose Pliers, 6.3″ Cable Cutters, 6.3″ Long Flat Nose Pliers, 6.3″ Stripping Pliers, 9.0″ Combo Pliers/Crimpers, 8.0″ Adjustable Wrench
Slotted Screwdrivers
Insulated Slotted 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.5mm, 6.0mm, 6.5mm, 8.0mm, 10.0mm
Phillips Screwdrivers
Insulated Phillips #0, #1, #2, #3
Inch Nut Drivers
Insulated Nut Driver 7/32″, 1/4″, 5/16″, 3/8″, 7/16″
Metric Nut Drivers
Insulated Nut Driver 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm, 13.0mm
Hex Inch T-Handles
Insulated T-handle Hex 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″
Hex Metric T-Handles
Insulated T-handle Hex 4.0mm, 5.0mm, 6.0mm, 8.0mm
Torx Screwdrivers
Insulated Torx T6, T7, T8, T9, T10, T15, T20, T25, T30
Square Screwdrivers
Insulated Square #1, #2
Xeno Screwdrivers (Phillips/slotted)
Insulated Slt/Ph Terminal #1, #2
Inch SAE Sockets
Insulated Socket 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″
Metric Sockets
Insulated Socket 13mm, 14mm, 15mm, 17mm, 19mm, 20mm, 22mm
Accessories:
Insulated Ratchet 3/8″ Drive
Insulated 4.9″ Extension 3/8″ Dr.
Insulated L-key 10mm
Insulated L-key 1/2″
Single Pole Voltage Detector-110V to 250V
Insulated Cable Knife 50mm
2 Meter Ruler In/MM
20.25″ x 23″ x 15″ (Case)